INTUMESCENT COATING TO UPGRADE
RAISED-AND-FIELDED DOORS TO FIRE-RATED DOORS
DESCRIPTION
Clear intumescent coating in matt, gloss, or semi-gloss finishes or white satin intumescent coating system, available in BS and RAL colours. Supplied in complete kits with sufficient quantities to treat either: (a) both sides of one door or (b) a single side on each of two doors.
USE
Apply to raised-and-fielded panelled doors to upgrade them to fire doors. There is no need to remove any existing gold leaf, paints, or varnish. Envirograf® Product 103 can be applied directly over all coatings after normal washing down. Ask our regional representative to inspect the door in order to verify its suitability for application of Envirograf® Product 103.
PERFORMANCE
This product has been used in many premises of the National Trust, English/Irish/Scottish Heritage. Doors must have a minimum 6mm thick fielded area and 31mm minimum thickness stiles and rails. Tested to BS476 Part 22 (1987), in which one door achieved an integrity in excess of 44 minutes and another door achieved an integrity in excess of 57 minutes.
ORDERING REFERENCES
ES/RFC/CM Clear Matt
ES/RFC/CG Clear Gloss
ES/RFC/CS Clear Semi-Gloss
ES/RFC/WS White Semi-Gloss
ES/RFC/TS Tinted Semi-Gloss
Supplied in kits sufficient to treat: (a) both sides of one door or (b) a single side
on each of two doors. Please refer to data sheet when specifying this product.
Treatment labels supplied, to be fitted to door spine to declare to Building
Control / Fire Officers that the upgrade treatment has been performed.
For friendly advice, please ring us! 01932 268440
